2-DAY Communications Basics Course
When: See
Available Dates
Time: 8:00 AM to 4:30 PM (1/2-hour lunch and refreshments
will be provided)
Where: 775 E Utah Valley Dr., American Fork, UT 84003
(see map)
Price: $775 Per Student
SIGN UP NOW!
COURSE OUTLINE
1. Setup serial connection to SLC 5/04
2. Setup DH+
a.Cabling (blue hose)
b. Setup SLC 5/04 node address using serial connection. (Octal vs decimal)
3. DH+ messaging
4. Global status flags
5. ControlLogix Gateway concept and the DHRIO module
6. Setting up the Ethernet IP address via the serial port of the CLX processor
7. Getting connected using the Ethernet Interface module (ENBT/ENET) in the CLX gateway via the DHRIO DH+
8. 1747-SN Remote I/O Scanner concepts
9. Powerflex 70 remote basic I/O mapping
10. SLC 5/04 to SN to Powerflex 70 drive communications setup
11. 3 Phase power – cautions/safety issues
12. Installing the RIO comm. module into the Powerflex 70 drive and remote I/O cabling (blue hose)
13. Powerflex 70 basic drive setup – speed control/RIO connectivity, etc.
14. Basic Powerflex 70 drive control concepts
15. Start/Stop/Speed command to drive via remote I/O
16. Connecting multiple Remote I/O devices
17. 1756 DNB DeviceNet Scanner concepts
18. CLX to DNB to Powerflex 70 drive communications setup
19. Installing the DNET comm. module into the Powerflex 70 drive and DNET cabling (24 VDC power supply)
20. Powerflex 70 basic drive setup – speed control/DNET connectivity, etc.
21. Start/Stop/Speed command to drive via DNET
22. Using extended drive Datalinks features using DNET comms to drive
23. Connecting multiple DNET devices
24. EtherNet I/P control using ControLogix processor/Enet interface
25. Connecting multiple Ethernet I/P control devices
SIGN UP NOW!
|
